Syvecs Forums

I popped to the workshop and did it on my spare block last night, it did indeed work great.

I can confirm that an M8 helicoil works nicely in M10 x 1.25, I havne't tried it on the block, but on a M10 1.25 nut. I screwed the helicoil into the nut, then screwed an M8 bolt into the helicoil. The STI tap for the M8 helicoil seems to be about 9.8mm x 1.25, so inserting a M8 helicoil into a 10 x...

Thanks Steve. I've ordered some M8 helicoils, as you say the purchase hasn't got to be 100%; I've got a spare block so I'll give it a go and see what happens. I don't think screwing a stud in, flushing it and drilling/tapping will work, not with M8 anyway as there not enough metal. If the helicoil i...

Hi, I'm presuming you are replacing (or have replaced) your stock 4G sensors with Bosch units? I was about to post a thread about the asking about the virtues of the stock 4G sensor, Vs the Bosch 0261231148; and I found this thread. I have both but the stock sensor has no ground, just signal, and th...

You can attach multiple sensors to a single 5v reference output.

I wouldn't have thought using an ignition output was a good idea.

All sorted now, thanks to Pat & Ryan for their help.
X10 is flashed, DBW output is happily assigned in I/O, and DBW is working.

Cheers,
Jezz.

As ever that's a great reply Pat, thanks. :) Got you regarding the termination, understood. I'm not sure if you've seen but I'm currently in conversation with Ryan via the Syvecs support email address regarding a couple of things. Firstly, if I assign Slave 11 to the DBW output I'm told that it is a...

pavlo wrote:In sdata go to "Device->Read Streamed Data"

Pavlo, can you expand on how this feature works please, as I can't get it to work and it would be useful to log to file.
It just seems to download the data stored on the ECU, not log a continuous stream.

Thanks,
Jezz.

Hi Pat, Thanks for the reply, I was working on a test loom last night when you replied. I have got the X10 and the S6 linked, and was able to assign a temp sensor to a slave input; so that's all good. Can you advise on how best to terminate the Can bus? Should the resistors be outboard at the very e...

Hi, I have an X10 which I want to link to my S6, is there a dummies guide on doing this, please? Also, what is considered best practice regarding sensors and the expander? Would I be right in saying it's be keep mission critical stuff, TPS, PPS, Cam, Crank, MAP (then AIT and ECT where available inpu...