Search found 162 matches

by dr_jones
Tue Jan 09, 2018 12:02 pm
Forum: General Syvecs Chat
Topic: Engine starting issue
Replies: 2
Views: 6297

Re: Engine starting issue

Good idea - I should have a cal of the same firmware revision that I could quickly pop on there to see. Cheers.
by dr_jones
Thu Jan 04, 2018 3:21 pm
Forum: General Syvecs Chat
Topic: Engine starting issue
Replies: 2
Views: 6297

Engine starting issue

Bit of a head scratcher this one - and probably more a general ecu calibration thing than syvecs specific: Some time back I re calibrated the linearization of my map sensor - I had an old an incorrect linearization the syvecs was reading slightly out. That meant I needed to re-work a fair bit of my ...
by dr_jones
Thu Nov 09, 2017 7:44 pm
Forum: General Syvecs Chat
Topic: "could not open device for streaming"
Replies: 5
Views: 11002

Re: "could not open device for streaming"

Cheers Slowie! I didn't realise that!
by dr_jones
Thu Nov 09, 2017 10:44 am
Forum: General Syvecs Chat
Topic: "could not open device for streaming"
Replies: 5
Views: 11002

Re: "could not open device for streaming"

Thanks chaps - mine turned out to be related to the fact that the engine wasn't actually 'running' at the time - was trying to capture start up knock signal and include in the overall streamed log - hadn't ever had need to do this - didn't note that the steaming doesn't start until engine is actuall...
by dr_jones
Wed Nov 08, 2017 12:45 pm
Forum: General Syvecs Chat
Topic: "could not open device for streaming"
Replies: 5
Views: 11002

"could not open device for streaming"

Got this errror yesterday after successfully streaming data, analysing and then going back for another run. Same laptop, same SS version, same cal, same everything - also i can still download logs and read program cals etc etc. Not dug too far into this - like swapping out current laptop for my old ...
by dr_jones
Wed Nov 08, 2017 12:41 pm
Forum: General Syvecs Chat
Topic: KnockWarnLight - how to test
Replies: 5
Views: 10949

Re: KnockWarnLight - how to test

I *thought* I had - but did not see anything triggered on the knockwarnlight - logs also confirmed it didn't activate.

The swapping in pitSwitch param to the data stream did prove out the Plex warning 'works' - in theory - I'll likely revisit with knockwarnlight when i get a moment.
by dr_jones
Tue Nov 07, 2017 8:30 am
Forum: General Syvecs Chat
Topic: KnockWarnLight - how to test
Replies: 5
Views: 10949

Re: KnockWarnLight - how to test

Ah yes that should do the job! I'll give that a whirl.
by dr_jones
Mon Nov 06, 2017 2:32 pm
Forum: General Syvecs Chat
Topic: KnockWarnLight - how to test
Replies: 5
Views: 10949

KnockWarnLight - how to test

Stumped on this one: I'm trying to configure KnockWarnLight to trigger the knock alarm on my Plex uSDM 102. KnockWarnLight is set to frame 14, slot 4 of the custom can content. I'm using y=(1*x)+0 to convert on the plex end. I'm seeing a value of "0" on the plex when KnockWarnLight is &quo...
by dr_jones
Tue Sep 19, 2017 3:43 pm
Forum: General Syvecs Chat
Topic: Knock sensor gain tuning - best practice
Replies: 0
Views: 23737

Knock sensor gain tuning - best practice

Playing around with knock sensor gain tuning I began to wonder what the best practice for setting up overall gain control along with individual gain tuning - heres how I've approached it on my EJ22: - Set all cylinder individual gains to 1 - Set overall gain to get my **quietest** cylinder (cyl1) ar...
by dr_jones
Tue Sep 19, 2017 2:52 pm
Forum: General Syvecs Chat
Topic: More Syvecs Plex CAN struggles
Replies: 9
Views: 19646

Re: More Syvecs Plex CAN struggles

Agreed - I was really more interested in having some way of seeing knock sensing was 'working' at any given moment - thinking I may in fact configure a maths channel on the plex to give me an average across all four cylinders now I've got the individual gains somewhere about right-ish.