Syvecs Forums

Hello: Have anyone seen this behaviour before? 1) If the ignition is left on long, the S6GP when starting just cuts out and looses power 2) Unplugging the S6gp for a while does not resolve the issue. 3) Install the OEM ECU, start the car and turn it off. Install the S6GP and it starts. Is this a Sec...

Increase more fuel to colder ect.

Sounds more like cranking enrichment. Sounds like a lean start.

Good news everyone. We Ryan help (Boyan too), we re-position the pins on the CAN cable and she is now communicating and key starting.
I am certain the pins were right, but there are now.

The next step is to schedule the installation and start tuning.

Thank you for the great support.

FUEL 01 - INJ 01 FUEL 02 - INJ 02 FUEL 03 - INJ 03 FUEL 04 - INJ 04 FUEL 05 - INJ 05 FUEL 06 - INJ 06 FUEL 07 - INJ 07 FUEL 08 - INJ 08 FUEL 09 - PWM1 - AUX1 FUEL 10 - PWM2 - AUX2 FUEL 11 - PWM3 - AUX3 FUEL 12 - PWM4 - AUX4 FUEL 13 - PWM5 - AUX5 FUEL 14 - PWM6 - AUX6 FUEL 15 - PWM7 - AUX7 FUEL 16 - ...

I ask because you have fuel 13 to 16.

Tim: When you see INJ5 (#13), what is the #13? Good news: I received an update for the CAN that I can see the led flashing. Boyan came in and she is running well. We drive it around the block, but she now have to be worked on. As soon as the CAN is sorted, we will attempt to install permanently (car...

Tim: Good news!!! A wonderful Syvecs personnel, who was on vacation help me review the setup. After bridging the starting motor, we was purring on the Syvecs. We have some harness issues and we have to get a diagram for them. All equipment will be shipped back for testing. I am going to request that...

Ok. No contact from Syvecs yet.

What makes it a little urgent too, the guy has a maf connector issue. So to get it in and start working would be great.

I am seeing B136 pin 32 attached to the same line. So I am wondering if that pin is for sensing a start from the pdf I attached above. Starting to feel like I am running around in circles. I will wait on Syvecs. Hopefully there can get back to me. The harness was built on the 2008+, based on the inf...