Syvecs Forums

Hi Guys,

Is this possible to setup in the Syvecs S6 PNP??? I have a car to map which has this combination fitted. With G11 setup, it runs (of course) only 360 deg sync. Would like to have it run in 720 mode!

Thanks,

Mark.

I was told by Ryan to aim for knock values of 3 - 5 at idle. If I adjust gain this way (using gain 0.708) I get max. knock values (without detonation) of around 9 to 10. Will it help the efficiency of the knock control to increase gain and aim for higher knock values?

Thanks,

Mark.

Perfect!

I assume this will work with S6, can somebody confirm?

Thanks,

Mark.

Anyone?

Any tips for setting this up? For Gain Control, I assume with more gain the "knock value" the ECU is using for knock control is increasing. Is there a certain average value (or max. value?) to aim for where knock control is working best? What's changing when Integrator Time Constant increa...

Will check, thanks!

Thanks Paul! I did use sync log once, but that was with cranking engine only. I don't have a Syvecs equiped car here to test with, can you shortly explain how to pull a sync log? Does it log as standard and I just push the "syncError" button after the error has occured when the "view ...

Hi Jasper,

I have looked for a rev limit in limp mode, as I expected it to have this, but overlooked it......

Thanks!

I have a problem in one car, getting cam sensor error every now and then. I have used the same Cam Sensor setup as used in other cars without trouble. What can I do? We have tried several cam sensors, the last one we fitted didn't gave any trouble on the dyno, but on the track we had cam errors agai...