Hi,
Can anyone let me know if by installing the Subaru 2008-2014 ECU kit, i can maintain the stability control?
Cheers
Search found 30 matches
- Fri Apr 24, 2015 5:20 pm
- Forum: S6 GP/PnP Technical
- Topic: Subaru 2008-2014 - Inc Hatchback
- Replies: 2
- Views: 6523
- Thu Feb 05, 2015 3:38 pm
- Forum: S6 GP/PnP Technical
- Topic: DCCD
- Replies: 1
- Views: 4777
DCCD
Hi,
Can anyone let me know the part number for the shottky diode i should use for the DCCD?
Cheers
Can anyone let me know the part number for the shottky diode i should use for the DCCD?
Cheers
- Sun Oct 05, 2014 9:24 am
- Forum: Subaru
- Topic: Vehicle speed output
- Replies: 7
- Views: 17349
Re: Vehicle speed output
Thank you for your help Steve :-) Have you tried that solution for vr wheelspeed sharing? If so, it worked ok? Our idea is to remove the abs completely because we thought that sharing the sensors signal was a bit tricky, please correct me if i am wrong since we would like to keep the abs. In that ca...
- Fri Oct 03, 2014 8:51 pm
- Forum: Subaru
- Topic: Vehicle speed output
- Replies: 7
- Views: 17349
Re: Vehicle speed output
We are using the standard abs sensors.
If they were Hall effect i believe we could do as you sugested.
If they were Hall effect i believe we could do as you sugested.
- Fri Oct 03, 2014 4:47 pm
- Forum: Subaru
- Topic: Vehicle speed output
- Replies: 7
- Views: 17349
Re: Vehicle speed output
Thank you very much Tim!
I suppose it has to be implemented on the firmware.
Cheers
I suppose it has to be implemented on the firmware.
Cheers
- Thu Oct 02, 2014 1:55 pm
- Forum: Subaru
- Topic: Vehicle speed output
- Replies: 7
- Views: 17349
Vehicle speed output
Hi,
We have an hatchback gearbox, without speed sensor, to install on a gc8 and would like to know if it´s possible to have a vehicle speed output from the S8 to the speedo cluster.
We have the abs sensors connected to the S8 for traction control.
Cheers
We have an hatchback gearbox, without speed sensor, to install on a gc8 and would like to know if it´s possible to have a vehicle speed output from the S8 to the speedo cluster.
We have the abs sensors connected to the S8 for traction control.
Cheers
- Mon May 12, 2014 9:49 pm
- Forum: S8 Technical
- Topic: Pin Assignment for DCCD Control
- Replies: 5
- Views: 16188
Re: Pin Assignment for DCCD Control
Thank you very much, Pat.
Will try with the 10A Schottky diode.
Cheers
Will try with the 10A Schottky diode.
Cheers
- Sat May 10, 2014 5:28 am
- Forum: S8 Technical
- Topic: Pin Assignment for DCCD Control
- Replies: 5
- Views: 16188
Re: Pin Assignment for DCCD Control
Pat,
May i use one of the ignition outputs from the S8 and connect it directly to the dccd coil?
If so and if i use, for example, ignition 7, what funtion should i assign from the list on the software? Diferential pressure control centre?
Cheers
May i use one of the ignition outputs from the S8 and connect it directly to the dccd coil?
If so and if i use, for example, ignition 7, what funtion should i assign from the list on the software? Diferential pressure control centre?
Cheers
- Fri May 09, 2014 9:00 pm
- Forum: S8 Technical
- Topic: Pin Assignment for DCCD Control
- Replies: 5
- Views: 16188
Pin Assignment for DCCD Control
Hi,
Can anyone tell me the Output Pin Assignment to control the DCCD?
I´ve already looked on the Software/Pin Assignments and couldn´t find anything specific for that function.
Cheers
Can anyone tell me the Output Pin Assignment to control the DCCD?
I´ve already looked on the Software/Pin Assignments and couldn´t find anything specific for that function.
Cheers
- Wed Feb 12, 2014 11:01 pm
- Forum: S8 Technical
- Topic: Traction control
- Replies: 7
- Views: 17941
Re: Traction control
Thanks Paul, i will try and post the results when everything ready.
Cheers
Cheers